IS 17030 : Part 1 : 2024/ISO 20685-1 : 2018 3-D Scanning Methodologies for Internationally Compatible Anthropometric Databases - Part 1 Evaluation Protocol for Body Dimensions Extracted from 3-D Body Scans
NATIONAL FOREWORD
This Indian Standard (Part 1) (First Revision) which is identical to ISO 20685-1 : 2018 3-D scanning methodologies for internationally compatible anthropometric databases - Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans’ issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the Ergonomics Sectional Committee and approval of the Production and General Engineering Division Council.
This standard was first published in 2018 based on ISO 20685 : 2010 was later revised in two parts, that is, ISO 20685-1 : 2018 ‘Evaluation protocol for body dimensions extracted from 3-D body scans’ and ISO 20685-2 : 2015 ‘Evaluation protocol of surface shape and repeatability of relative landmark positions’. It was decided to adopt both parts separately, as IS 17030 (Part 1) and IS 17030 (Part 2) and this standard is an adoption of ISO 20685-1:2018
This standard has been published in 2 parts. Other part in this series is:
Part 2 Evaluation protocol of surface shape and repeatability of relative landmark positions
The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are however not identical to those used in Indian Standards. Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’; and
b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.