Reaffirmed 2024

1. SCOPE

This standard prescribes requirements and methods of sampling and test for carry case used for packing, storage, transportation and handling of voter verifiable paper audit trail (VVPAT) printer. The carry case is intended for use in indoor application only.

2. REFERENCES

The following Indian Standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on the subject are encouraged to investigate the possibilities of applying the most recent editions of the standards indicated below:

397 Method for statistical quality control during production

(Part 1) : 2003 Control charts for variables

(Part 2) : 2003 Control charts for attributes

4905 : 1968 Methods for random sampling

7028 Performance tests for complete, filled transport packages

(Part 1) : 2002 Stacking tests using static load

(Part 2) : 2002 Vibration test at fixed low frequency

(Part 3) : 2002 Horizontal impact tests (horizontal or inclined test; pendulum test)

(Part 4) : 1987 Vertical impact drop test

(Part 5) : 1987 Rolling test ( first revision )

(Part 8) : 2002 Water spray test

7031 : 2002 Method of conditioning for testing of complete, filled transport packages

13360 Plastics — Methods of testing

(Part 3/Sec 10) : 2016 Physical and dimensional properties, Section 10 Determination of density of noncellular plastics — Immersion method, liquid pyknometer method and titration method

(Part 4/Sec 1) : 2000 Theological properties, Section 1 Determination of the melt massflow rate (MFR) and the melt volume-flow Rate (MVR) of thermoplastics (first revision)

(Part 5/Sec 1) : 2018 Mechanical properties, Section 1 Determination of tensile properties — General requirements ( first revision )

(Part 5/Sec 4) : 2013 Mechanical properties, Section 4 Determination of izod impact strength (first revision)

(Part 5/Sec 7) : 2017 Mechanical properties, Section 7 Determination of flexural properties (first revision)

(Part 6/Sec 3) : 2017 Thermal properties, Section 3 Determination of temperature of deflection under load — General test method ( second revision )

(Part 6/Sec 17) : 2017 Thermal properties, Section 17 Determination of temperature of deflection under load — Plastics and ebonite ( second revision )

(Part 8/Sec 8) : 2004 Permanence/chemical properties, Section 8 Determination of ash — General methods ( first revision )