New Standard from Last Update.

1. SCOPE

This Indian Standard prescribes the requirements and methods of sampling and test for lubricating oils intended for use as lubricants for syngas and ammonia turbo-compressor.

2. REFERENCES

The following standards contain provisions which, through reference in this text, constitute provisions of the standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

IS 1447 (Part 3) : 2021 Methods of sampling of petroleum and its products: Part 3 Method of sampling of semi-solid and solid petroleum products (second revision)

IS 1448 Methods of test for petroleum and its products

[P : 2] : 2007/ISO 6619 : 1988 Petroleum products and lubricants - Neutralization number - Potentiometric titration method (second revision)

[P : 10/Sec 2] : 2013/ISO 3016 : 1994 Cloud point and pour point, Section 2 Determination of pour point (second revision)

[P : 12] : 2013/ISO 2049 : 1996 Determination of colour (ASTM SCALE) (second revision)

[P : 15] : 2004/ISO 2160 : 1998 Petroleum products - Corrosiveness to copper - Copper strip test (third revision)

[P : 16] : 2014/ISO 3675 : 1998 Crude petroleum and liquid petroleum products - Laboratory Determination of density - Hydrometer method (fourth revision)

[P : 25/Sec 1] : 2018/ISO 3104 : 1994 Transparent and opaque liquids, Section 1 Determination of kinematic viscosity and calculation of dynamic viscosity (second revision)

[P : 33] : 1991 Sulphur by bomb method (second revision)

[P : 56] : 2013/ISO 2909 : 2002 Calculation of viscosity index from kinematic viscosity (third revision)

[P : 67] : 2020 Determination of foaming characteristics of lubricating oils (second revision)

[P : 69] : 2019/ISO 2592 : 2017 Determination of flash and fire points - Cleveland open cup method (second revision)

[P : 91] : 2019/ISO 6614 : 1994 Determination of water separability of petroleum oils and synthetic fluids (first revision)

[P : 96] : 2019/ISO 7120 : 1987 Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (first revision)

[P : 102] : 1981 Determination of air release value

[P : 106] : 1981 Determination of oxidation characteristics of inhibited steam-turbine oils

9466 : 2020 Viscosity classification of industrial liquid lubricants (first revision)