IS 17458 : Part 1 : 2024/ISO 22705-1 : 2021 Springs - Measurement and Test Parameters - Part 1 Cold Formed Cylindrical Helical Compression Springs
NATIONAL FOREWORD
This Indian Standard (Part 1) which is identical to ISO 22705-1 : 2021 'Springs - Measurement and test parameters - Part 1: Cold formed cylindrical helical compression springs' issued by International Organization for Standardization (ISO), was adopted by the Bureau of Indian Standards on the recommendation of the Springs and Suspension Systems Sectional Committee and approval of the Transport Engineering Division Council.
This standard is one of the part of standards on the springs measurement and test parameters. Other part of this standard is:
Part 2 Cold formed cylindrical helical extension springs
The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:
a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'; and
b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.