IS 17884 : Part 3 : 2024/ISO 12217-3 : 2022 Small Craft - Stability and Buoyancy Assessment and Categorization - Part 3 Boats of Hull Length Less than 6 m
NATIONAL FOREWORD
This Indian Standard (Part 3) (First Revision) which is identical to ISO 12217-3 : 2022 'Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m' issued by International Organization for Standardization (ISO), was adopted by the Bureau of Indian Standards on the recommendations of the Inland Harbour Crafts and Fishing Vessels Sectional Committee and approval of the Transport Engineering Division Council.
This standard was first published in 2022 which was identical adoption of ISO 12217-3 : 2015. This revision has been undertaken to harmonize it with ISO 12217-3 : 2022. The major changes incorporated in this standard are as follows:
a) The normative references have been updated;
b) The “allowance for the maximum mass of optional equipment and fittings not included in the manufacturer's basic outfit” has been moved from 3.3.3 (maximum load) to 3.3.4 (maximum load condition);
c) In F.1, the first paragraph has been slightly reworded as a note, so as to clearly make an informative reference to ISO 10240, which has been moved from 2 to the bibliography;
d) In Annex H, the calculation worksheet No. 1 has been corrected to reflect the changes in 3.3.3 and 3.3.4; and
e) Minor editorial changes throughout the document.
This standard has been issued in several parts. Other parts in this series are:
Part 1 Non-sailing boats of hull length greater than or equal to 6 m
Part 2 Sailing boats of hull length greater than or equal to 6 m.
The text of ISO standard may be approved for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:
a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'; and
b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.