IS 17917 : 2022 Pressure Sensitive Adhesive Films for General Industrial Applications - Specification

ICS 83.180

PCD 12

New Standard from Last Update.

1. SCOPE

1.1 This standard prescribes the requirements and methods of sampling and test for adhesive film which is a layer of acrylic or rubber-based pressure sensitive adhesive film coated on special paper or film release liner.

1.2 For application, the tape is simply pressed adhesive side down to the intended surface and the liner is peeled off.

1.3 This Standard does not cover medical and other specialized applications like UV cured adhesive films.

2. REFERENCES

The following standards contain provisions, which through reference in this text constitute the provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most editions of the standards indicated below.

IS 3434 : 1984 Glossary of terms for adhesive and pressure sensitive adhesive tapes (first revision )

IS 6911 : 1972 Stainless steel plate sheet and strip

IS 8402 : 1987 Methods of sampling and test for pressure sensitive adhesive tapes (first revision )

IS 3687 : 1987 Specification for pressure sensitive adhesive cloth tapes

IS 13262 : 1992 Pressure sensitive adhesive tapes with plastic base specification

IS 7809 (Part 2) : 1977 Specification of pressure sensitive adhesives for electrical purposes

IS 16197 (Part 4) : 2014 / IEC 62321-4 : 2013 Determination of certain substances in electrotechnical products: Part 4 Mercury in polymers, metals and electronics by CV - AAS, CV - AFS, ICP - OES and ICP - MS

IS 16197 (Part 5) : 2014 / IEC 62321-5 : 2013 Determination of certain substances in electrotechnical products: Part 5 Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP - OES and ICP - MS

IS 16197 (Part 6) : 2018 / IEC 62321-6 : 2015 Determination of certain substances in electrotechnical products : Part 6 Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by Gas Chromatography - Mass Spectrometry (GC-MS)

IS 16197 (Part 7/ Sec 2) : 2020 / IEC 62321-7-2 : 2017 Determination of certain substances in electrotechnical products : Part 7 Hexavalent Chromium, Section 2 Determination of hexavalent chromium [Cr(VI)] in polymers and electronics by colorimetric method

IS 16197 (Part 8) : 2020 / IEC 62321-8 : 2017 Determination of certain substances in electrotechnical products : Part 8 Phthalates in polymers by Gas Chromatography - Mass Spectrometry ( GC-MS ), Gas Chromatography - Mass Spectrometry Using a Pyrolyzer / Thermal Desorption Accessory ( Py-TD-GC-MS)

ISO 4587 : 2003 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

ISO 21675 : 2019Water quality - Determination of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water - Method using solid phase extraction and liquid chromatography-tandem mass spectrometry (LC-MS/MS)

ISO 29862 : 2018 Self-adhesive tapes - Determination of peel adhesion properties

ISO 29863 : 2018 Self-adhesive tapes - Measurement of static shear adhesion