IS 18693 : Part 1 : 2024/ISO 15519-1 : 2010 Diagrams for Process Industry - Specification - Part 1 General Rules

ICS 01.110; 01.080.30

PGD 24

NATIONAL FOREWORD

This Indian Standard (Part 1) which is identical to ISO 15519-1 : 2010 'Specification for diagrams for process industry - Part 1: General rules' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the Drawings Sectional Committee and approval of the Production and General Engineering Division Council.

This standard is published in two parts. Other part in this series is:

Part 2 Measurement and control

The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'; and

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.