IS 18738 : Part 3 : 2024/ISO 15792-3 : 2011 Welding Consumables - Methods of Test - Part 3 Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld
NATIONAL FOREWORD
This Indian Standard (Part 3) which is identical to ISO 15792-3 : 2011 'Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld' issued by the International Organization for Standardization (ISO), was adopted by the Bureau of Indian Standards on the recommendation of the Welding General and its Applications Sectional Committee and approval of the Metallurgical Engineering Division Council.
This part of ISO 15792 specifies the preparation and assessment of fillet weld test pieces.
The Committee decided to adopt ISO 15792-3 : 2011 standard under dual numbering system.
This Indian Standard is published in three parts. The other parts in this series are:
Part 1 Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
Part 2 Preparation of single-run and two-run technique test pieces and specimens in steel
The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical with those used in Indian Standard. Attention is especially drawn to the following:
a) Wherever the words 'International Standard' appear referring to this standard, it should be read as 'Indian Standard'.
b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.