IS 18824 : Part 1 : 2024/ISO 20182 : 2008 Refractory Test-Piece Preparation - Part 1 Gunning Refractory Panels by the Pneumatic-Nozzle Mixing Type Guns

ICS 81.080

MTD 15

NATIONAL FOREWORD

This Indian Standard (Part 1) which is identical to ISO 20182 : 2008 'Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Refractories Sectional Committee and approval of the Metallurgical Engineering Division Council.

This Indian Standard has been issued in two parts. Other part of this Indian Standard is:

Part 2 Gunning refractory panels by wet gunning techniques

The text of ISO standard has been approved as suitable for publication as in Indian Standard without deviations. Certain terminologies and conventions are, however, not identical with those used in Indian Standard. Attention is especially drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, it should be read as 'Indian Standard'; and

b) Comma (,) has been used as a decimal marker while in Indian Standards the current practice is to use a point (.) as the decimal marker.