IS 1891 : Part 2 : 2025 Rubber Conveyor and Elevator Textile Belting - Specification - Part 2 Heat Resistant Belting

1 SCOPE

This Indian Standard (Part 2) specifies the requirements of conveyor and elevator textile belting for use on flat or troughed idlers for conveying hot materials which are classified as follows given in Table 1.

These classes do not correspond to the temperature of the transported product, they are generally lower to account for. Depending on the use for which the belt is intended, the manufacturer should state the class to be used for assessing compliance with this Indian Standard. For higher than the above specified material temperature, user may consult the manufacturer for an alternative grade and should agree on alternate temperature of ageing and/or duration.

2 REFERENCES

The standards listed in Annex A contain provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and encouraged to investigate the possibility of applying the most recent edition of these standards.