IS 1946 : Part 2 : 2025 Fixing Devices in Walls, Ceilings and Floors of Solid Construction - Part 2 Design of Post-Installed Anchorage to Concrete - Code of Practice
1 SCOPE
1.1 The standard (Part 2) covers the design of post-installed mechanical anchors and post-installed adhesive anchors in concrete when subjected to static, quasi-static or earthquake loads. The design method in this standard is applicable only to anchors that have been tested and assessed according to IS 1946 (Part 3) and (Part 4). The assessment report (AR) of the anchor generated based on this assessment shall be referred to for various design parameters. The concrete that forms the base material for the connection shall be in conformity with IS 456 and IS 1343.
1.2 The design provisions in the standard do not apply to cast-in anchors and to anchors in plastic hinge area.
1.3 Specialist literature of eminence may be consulted for guidance regarding fire, fatigue, or blast loads, where applicable.
NOTE - Specialist literature of eminence refers to any standard (national/international) beyond the said standard.
2 REFERENCES
The standards listed in Annex A contains provisions, which through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.