| IS No. | Title |
| IS 277 : 2018 | Galvanized steel strips and sheets (plain and corrugated) - Specification (seventh revision) |
| IS 513 (Part 1) : 2016 | Cold reduced carbon steel sheet and strip: Part 1 Cold forming and drawing purpose (sixth revision) |
| IS 733 : 1983 | Specification for wrought aluminium and aluminium alloy bars, rods and sections (for general engineering purposes) (third revision) |
| IS 738 : 1994 | Wrought aluminium and its alloys - Drawn tube for general engineering purposes - Specification (third revision) |
| IS 875 (Part 3) : 2015 | Design loads (other than earthquake) for buildings and structures - Code of practice: Part 3 Wind loads (third revision) |
| IS 1079 : 2017 | Hot rolled carbon steel sheet, plate and strip - Specification (seventh revision) |
| IS 1868 : 1996 | Anodic coatings on aluminium and its alloys - Specification (third revision) |
| IS 2553 (Part 1) : 2018 | Safety glass - Specification: Part 1 Architectural, building and general uses (fourth revision) |
| IS 3400 | Methods of test for vulcanized rubber or thermoplastic: |
| (Part 1) : 2021/ISO 37 : 2017 | Tensile stress-strain properties (fourth revision) |
| (Part 2/Sec 2) : 2023/ISO 48-2 : 2018 | Determination of hardness Section 2 Hardness between 10 IRHD and 100 IRHD (fifth revision) |
| (Part 4) : 2012/ISO 188 : 2011 | Accelerated ageing and heat resistance (third revision) |
| (Part 10/Sec 1) : 2022/ISO 815-1 : 2019 | Compression set, Section 1 At ambient or elevated temperatures (third revision) |
| (Part 12) : 2022/ISO 34-1 : 2015 | Tear strength - Trouser, angle and crescent test piece (first revision) |
| (Part 20) : 2018/ISO 1431-1 : 2012 | Resistance to ozone cracking - Static strain test (second revision) |
| (Part 23/Sec 2) : 2018/ISO 7619-2 : 2010 | Rubber - Determination of indentation hardness by means of pocket hardness meters, Section 2 IRHD pocket meter method (first revisio) |
| IS 3438 : 2023 | Silvered glass mirrors for general purposes - Specification (third revision) |
| IS 5052 : 1993 | Aluminium and its alloystemper designations (first revision) |
| IS 6911 : 2017 | Stainless steel plate, sheet and strip - Specification (second revision) |
| IS 8147 : 1976 | Code of practice for use of aluminium alloys in structures |
| IS 9844 : 1981 | Methods of testing corrosion resistance of electroplated and anodized aluminium coatings by neutral salt spray test |
| IS 13871 : 2021 | Powder coatings - Specification (first revision) |
| IS 14900 : 2018 | Transparent float glass Specification (first revision) |
| IS 16231 | Use of glass in buildings - Code of practice: |
| (Part 1) : 2019 | General methodology for selection (first revision) |
| (Part 2) : 2019 | Energy and light (first revision) |
| (Part 3) : 2019 | Fire and loading (first revision) |
| (Part 4) : 2019 | Safety related to human impact (first revision) |
| IS 16978 | Glass in building - Forcedentry security glazing: |
| (Part 1) : 2022/ISO 16936-1 : 2020 | Test and classification by repetitive ball drop (first revision) |
| (Part 2) : 2018/ISO 16936-2 : 2005 | Test and classification by repetitive impact of a hammer and axe at room temperature |
| (Part 3) : 2018/ISO 16936-3 : 2005 | Test and classification by manual attack |
| (Part 4) : 2018/ISO 16936-4 : 2005 | Test and classification by pendulum impact under thermally and fire stressed conditions |
| IS 16982 : 2018 | Heat strengthened glass - Specification |
| IS 17346 : 2020 | Insulating glazing unit - Specification |
| IS 18648 : 2024 | Classification and performance requirements for doors windows and sliders - Specification |