IS 2002 : 2009 Steel Plates for Pressure Vessels for Intermediate & High Temperature Service Including Boilers
ICS 77.140.30.77.140.50 | MTD 4 |
|
Reaffirmed 2018 |
1 Scope
This standard covers the requirements of plain carbonsteel plates produced in discrete cut lengths of flatproduct or plates that have been leveled and flattenedand cut to length from a coiled product. These platesare intended for use in pressure vessels for intermediateand high temperature service which include boilers.
Plates under this standard are available in three gradesas follows:
a) Grade 1 - Low tensile steel plates for fireboxes and boiler plates which require welding,flanging or flame cutting;
b) Grade 2 - Medium tensile plates which canbe used for welding, flanging and flamecutting; and
c) Grade 3 - High tensile steel plates whichcan be used for welding, flame cutting, andhot flanging under controlled conditions.
2 References
The following standards contain provisions whichthrough reference in this text, constitute provisions ofthis standard. At the time of publication, the editionsindicated were valid. All standards are subject torevision and parties to agreements based on thisstandard are encouraged to investigate the possibilityof applying the most recent editions of the standardsindicated below:
IS No. | Title |
IS 228 (relevant parts) | Methods of chemical analysis of steel |
IS 1599 : 1985 | Method for bend test (second revision) |
IS 1608 : 2005 | Metallic materials - Tensile testing at ambient temperature (third revision) |
IS 1956 : Part 4 : 1975 | Glossary of terms relating to iron and steel: Part 4 Steel sheet and strip |
IS 4225 : 2004 | Recommended practice for steel beam ultrasonic testing of steel plates (second revision) |
IS 4748 : 1988 | Methods for estimating average grain size of metals (first revision) |
IS 8910 : 1978 | General technical delivery requirements for steel and steel products |
IS 12457 : 1988 | Code of practice for evaluation, repairs and acceptance limits of surface defects in steel plates and wide flats |
IS/ISO 7452 : 2002 | Hot-rolled structural steel plates - Tolerances on dimensions and shape |