IS 2486 : Part 1 : 1993 Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V: Part 1 General requirements and tests
UDC 621.315.65 : 621.315.1.027.5/.8 | ETD 6 |
|
Reaffirmed 2018 |
1 Scope
This standard (Part 1) gives the general requirements and tests for insulator fittings for use on overhead power lines having anominal voltage greater than 1000 V.
2 References
IS 209 :1979Specification for zinc
IS 226 :1975Structural steel (standard quality)
IS 410 :1977Specification for cold rolled brass sheet, stripand foil
IS 1367 : Part 1 :1980 Technical supply conditions for threaded steelfasteners : Part 1 Introduction and generalinformation
IS 1367 : Part 6 :1979 Mechanical properties and test methods for nutswith specified proof loads
IS 1570 : Part 2 :1979 Schedules for wrought steels : Part 2 Carbonsteels unalloyed steels
IS 1573 :1986Electroplated coatings of zinc on iron and steel
IS 1865 :1974Iron castings with spheroidal or nodulargraphite
IS 1875 :1978Carbon steel billets, blooms, slabs and bars for forgings
IS 2004 :1978Carbon steel forgings for general engineering purposes
IS 2107 :1977Whiteheart malleable iron castings
IS 2108 :1977Blackheart - malleable iron castings
IS 2121 : Part 1 :1981 Conductors and earth wire accessories foroverhead power lines : Part 1 Armour rods,binding wires and tapes for conductors
IS 2121 : Part 2 :1981 Conductors and earth wire accessories for overhead power lines : Part 2 Mid-span jointsand repair sleeves for conductors
IS 2486 : Part 2 :1989 Insulator fittings for overhead powerlines withnominal voltage greater than 1000 V: Part 2 Dimensional requirements
IS 2486 : Part 3 :1974 Insulator fittings for overhead powerlines withnominal voltage greater than 1 000 V : Part 3 Locking devices
IS 2629 :1966Recommended practice for hot-dip galvanizing of iron and steel
IS 2633 :1986Method of testing uniformity of coatings onzinc coated articles
IS 4759 :1984Hot-dip zinc coatings on structural steel and other allied products
IS 4905 :1968Methods for random sampling
IS 5082 :1981Wrought aluminium and aluminium alloy bars,rods, tubes and sections for electrical purposes
IS 5522 :1992Stainless steel for utensils sheets and strips
IS 5561 :1971Electric power connector
IS 6051 :1970Code for designation of aluminium and its alloys
IS 6603 :1972Stainless steel bars and flats
IS 7814 :1975 Phosphor bronze sheet, strip and foil