ICS 23.040.70                          PCD 13

Reaffirmed 2018

NATIONAL FOREWORD

This Indian Standard (Fifth Revision) which is identical with ISO 1403 : 2005 ‘Rubber hoses, textilereinforced, for general - purpose water applications - Specification’ issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Rubber and Rubber Products Sectional Committee and approval of the Petroleum, Coal and Related Products Division Council.

This standard was first published in 1953 and subsequently revised in 1964, 1968, 1980 and 1987. The second revision was amalgamated revision of IS 444 : 1964 ‘Specification for water hose of rubber, low pressure with woven reinforcement (revised)’ and IS 445 : 1964 ‘Specification for water hose of rubber, high pressure with woven reinforcement (revised)’ covering both light and heavy duty hoses. Third revision was amalgamated revision of IS 444 : 1968 ‘Specification for water hose of rubber with woven textile reinforcement (second revision)’ and IS 913 : 1968 ‘Specification for water hose of rubber with braided textile reinforcement (second revision)’ covering both woven and braided constructions. In fourth revision, specific materials and design features were not specified and only performance requirements were specified to allow for future technological developments. Further, the requirements for pressure, accelerated ageing and adhesion were modified. The fifth revision of this standard has been undertaken to align it with the latest version of ISO 1403 : 2005 (last reviewed in 2013) in dual numbering system to make pace with latest developments that have taken place at international level. In this revision, the title of ISO standard has been retained, as it is an identical standard.

This standard also makes a reference to the Pacing and BIS Certification Marking of the product. Details of which are given in National Annex A.

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions and terminologies are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker.