IS 4573 : 2020 Power Driven Mobile Cranes - Specification
Revised Standard from Last Update.
1. SCOPE
1.1 This standard covers power driven mobile cranes, either wheel mounted or crawler mounted (tracked), of the following types but does not include rail-mounted cranes:
a) Type 1 - Fully mobile full-slewing;
b) Type 2 - Fully mobile part-slewing;
c) Type 3 - Fully mobile non-slewing;
d) Type 4 - Truck mounted fully mobile fullslewing;
e) Type 5 - Truck mounted fully mobile partslewing;
f) Type 6 - Truck mounted fully mobile nonslewing;
g) Type 7 - Semi-mobile types of any of the above classes; and
h) Type 8 - Portable.
1.2 This standard does not cover hazards related to the lifting of persons.
2. REFERENCES
The standards listed below contain provisions which, through reference in this text constitute provisions of this standard. At the time of publication, the editions were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards:
210 : 2009 Grey iron castings - Specification (fifth revision)
1030 : 1998 Carbon steel castings for general engineering purposes - Specification (fifth revision)
2062 : 2011 Hot rolled medium and high tensile structural steel - Specification (seventh revision)
4460 (Part 1 to Part 3) : 1967 Gears - Spur and helical gears - Calculation of load capacity (first revision)
1364 (Part 1) : 2018 Hexagon head bolts, screws and nuts of product grade A and B: Part 1 Hexagon head bolts (size range M 1.6 to M 64) (fifth revision)
1364 (Part 2) : 2018 Hexagon head bolts, screws and nuts of product grade A and B: Part 2 Hexagon head screws (size range M 1.6 to M 64) (fifth revision)
1364 (Part 4) : 2003 Hexagon head bolts, screws and nuts of product grade A and B: Part 4 Hexagon thin nuts (chamfered) (size range M 1.6 to M 64) (fourth revision)
1364 (Part 5) : 2002 Hexagon head bolts, screws and nuts of product grade A and B: Part 5 Hexagon thin nuts - Product grade B (unchamfered) (size range M 1.6 to M 64) (fourth revision)
1364 (Part 6) : 2018 Hexagon head bolts, screws and nuts of product grade A and B: Part 6 Hexagon nuts style 2 (first revision)
1367 (Part 1) : 2014 Tolerance supply conditions for threaded steel fasteners: Part 1 General requirements for bolts, screws, studs and nuts (fourth revision)
1367 (Part 9/Sec 1) : 1993 Tolerance supply conditions for threaded steel fasteners: Part 9 Surface discontinuitiesSection 1 Bolts, screws and studs for general applications (third revision)
1367 (Part 9/Sec 2) : 1993 Tolerance supply conditions for threaded steel fasteners: Part 9 Surface discontinuities, Section 2 Bolts, screws and studs for special applications (third revision)
1367 (Part 10) : 2002 Tolerance supply conditions for threaded steel fasteners: Part 10 Surface discontinuities - Nuts (third revision)
1367 (Part 16) : 2002 Tolerance supply conditions for threaded steel fasteners: Part 16 Designation system for fasteners (third revision)
1367 (Part 18) : 1996 Tolerance supply conditions for threaded steel fasteners: Part 18 Packaging (third revision)
2016 : 1967 Specification for plain washers (first revision)
5372 : 1975 Specification for taper washers for channels (ISMC) (first revision)
5374 : 1975 Specification for taper washers for I-BEAMS (ISMB) (first revision)
12615 : 2018 Line operated three phase a.c. motors (IE CODE) ‘Efficiency Classes and Performance Specification’ (third revision)
15683 : 2006 Portable fire extinguishers - Performance and construction - Specification
ISO 3795 : 1989 Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials