IS 4682 : Part 1 : 2024 Medical Lining of Vessels and Equipment for Chemical Processes - Code of Practice - Part 1 Rubber Lining
1 SCOPE
1.1 This Indian Standard (Part 1) specifies requirements for the lining of equipment for the process industries using cold rubber. It applies to equipment fabricated in metal or concrete.
1.1.1 It includes requirements for the choice of lining and its application and also requirements for inspection of the lining and the rectification of faults. The materials considered include natural and synthetic rubbers applied as unvulcanized or prevulcanized sheet.
1.1.2 Brushed or sprayed rubber linings arc not included.
NOTE - The linings may be applied at the applicator's works or on site.
1.2 It includes requirements for design and fabrication of the equipment and the state of preparation necessary for the surfaces to be lined. It also includes requirements for storage, handling, transportation and installation of the lined equipment.
2 REFERENCES
The standards listed in Annex A contain provisions which through reference in this text, constitute provision of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of these standards.
| IS No. | Title |
| IS 456 : 2000 | Plain and reinforced concrete - Code of practice (fourth revision) |
| IS 803 : 1976 | Code of practice for design, fabrication and erection of vertical mild steel cylindrical welded oil storage tanks (first revision) |
| IS 1876 : 2005/IEC 60052 : 2002 | Voltage measurement by means of standard air gaps (first revision) |
| IS 2825 : 1969 | Code for unfired pressure vessels |
| IS 3370 | Concrete structures for retaining aqueous liquids - Code of practice: |
| (Part 1) : 2021 | General requirements (second revision) |
| (Part 2) : 2021 | Plain and reinforced concrete (second revision) |
| (Part 3) : 2021 | Prestressed concrete (first revision) |
| (Part 4/Sec 1) : 2021 | Design tables, Section 1 Plates (first revision) |
| IS 3400 (Part 2/Sec 2) : 2023/ISO 48-2 : 2018 | Methods of test for rubber, vulcanized or thermoplastic: Part 2 Determination of hardness Section 2 Hardness between 10 IRHD and 100 IRHD (fifth revision) |
| IS 3400 (Part 14/Sec 2) : 2021/ISO 814 : 2017 | Methods of test for vulcanized rubbers: Part 14 Adhesion of rubber to metal, Section 2 Two-plate method (second revision) |
| IS 7503 : 2018/ISO 1382 : 2012 | Glossary of terms used in rubber industry |
| IS 10500 : 2012 | Drinking water - Specification (second revision) |