IS 5690 : 1982 Guide for laying combination lining for existing unlined canals
UDC 626.823.91 (026) | WRD 13 |
|
Reaffirmed 2013 |
1 Scope
1.1 This standard lays down guidelines for lining of existing unlined canals with combination lining which consists of lining the sides of a canal with rigid lining with or without polytheylene film or bitumen felt underneath and the bed with a suitably protected flexible type of lining.
1.2 Combination lining is suitable for those reaches which are in regime or which have acquired working stability. Combination lining may also be adopted for reaches not in regime but not subjected to scouring by taking suitable steps, such as changing the sided slope, providing falls, etc.
2 References
IS 2 : 1960 Rules for rounding off numerical values
IS 269 : 1976 Specification for ordinary and low heat Portland cement
IS 455 : 1976 Specification for Portland slag cement
IS 1489 : 1976 Specification for Portland-pozzolana cement
IS 1542 : 1977 Specification for sand for plaster
IS 2116 : 1980 Specification for sand for masonry mortars
IS 2508 : 1977 Specification for low density polyethylene films
IS 3367 : 1975 Specification for burnt clay tiles for use in lining irrigation and drainage works
IS 3860 : 1966 Specification for precast cement concrete slabs for canal linings
IS 3872 : 1966 Code of practice for lining of canals with burnt clay tiles
IS 3873 : 1978 Code of practice for laying itt situ cement concrete lining on Canals
IS 5331 : 1969 Guide for selection of type of lining for canals
IS 7193 : 1974 Specification for glass fibre base coal tar pitch and bitumen felts
IS 9097 : 1979 Guide for laying lining of canals with hot bitumen or bituminous felts
IS 9698 : 1980 Code of practice for lining of canals with low density polyethylene film