IS 5823 : 1986 Specification for Dining Tables

1 Scope

1.1 This standard covers requirements for materials, sizes andfunctional dimensions of all types of dining tables.

2 References

IS 110 :1983Specification for ready mixed paint,brushing, grey filler, for enamels, foruse over primers

IS 151 : 1950Specification for ready mixed paint,spraying, finishing, stoving enamel, forgeneral purposes, colour as required

IS 287 :1973 Recommendations for maximum permissiblemoisture content for timber used fordifferent purposes

IS 303 :1975Specification for plywood for generalpurposes

IS 399 :1963Classification of commercial timbers andtheir zonal distribution

IS 849 :1957Specification for cold setting caseinglue for wood

IS 851 :1978Specification for synthetic resinadhesives for construction work(non-structural) in wood

IS 852 :1969Specification for animal glue for generalwood-working purposes

IS 1331 :1971Specification for cut sizes of timber

IS 1734 : Part 5 :1983 Methodsof test for plywood :Part 5 Test for adhesion

IS 2046 :1969Specification for decorativethermosetting synthetic resin bondedlaminated sheets

IS 2338 : Parts 1 and 2 : 1967 Code of practice forfinishing of woodand wood-based materials:Part 1 Operations and workmanshipPart 2 Schedules

IS 2812 :1964Recommendations for manual tungsteninert-gas arc-welding of aluminium andaluminium alloys

IS 2932 :1974Specification for enamel, synthetic,exterior (a) undercoating, (b) finishing

IS 2933 :1975Specification for enamel, exterior (a)undercoating, (b) finishing

IS 3618 :1966Specification for phosphate treatment ofiron and steel for protection againstcorrosion

IS 4414 :1977Specification for wooden table tops

IS 4835 :1979Specification for polyvinyl acetatedispersion-based adhesives for wood

IS 5660 :1970Specification for ready mixed paint, brushing,aluminium red oxide primer

IS 5807 : Part 1 :1975Method of test for clear finishes forwooden furniture :Part 1 Resistance to dry heat

IS 5807 : Part 2 :1975Method of test for clear finishes forwooden furniture :Part 2 Resistance to wet heat

IS 5807 : Part 4 :1975Method of test for clear finishes forwooden furniture :Part 4 Resistance-to marking by liquids

IS 5807 : Part 6 :1978Method of test for clear finishes forwooden furniture :Part 6 Resistance to mechanical damage

IS 6005 :1970Code of practice for phosphating of ironand steel