IS 5888 : 1970 Code of practice for design and construction of fire service drill-tower
UDC 614.842.83.053 : 614.842.84 | CED 22 |
|
Reaffirmed 2020 |
1 Scope
1.1 This standard lays down the requirements for functionaldesign, materials, dimensions and location of the `fire servicedrill-tower'.
2 References
IS 2 :1960Rules for rounding off numerical values
IS 269 :1967Specification for ordinary, rapid-hardening andlow heat Portland cement
IS 383 :1963Specification for coarse and fine aggregatefrom natural sources for concrete
IS 432 : Part I :1966 Specification for mild steeland medium tensilesteel bars and hard-drawn steel wire forconcrete reinforcement:Part I Mild steel and medium tensile steel bars
IS 432 : Part II :1966 Specification for mild steel andmedium tensile steel barsand hard-drawn steel wire forconcrete reinforcement:Part II Hard-drawn steel wire
IS 455 :1967Specification for Portland blastfurnace slagcement
IS 1077 :1968Specification for common burnt clay buildingbricks
IS 1977 :1962Specification for structural steel (ordinaryquality)
IS 1139 :1966Specification for hot rolled mild steel andmedium tensile steel deformed bars for concretereinforcement
IS 1321 :1970Specification for sisal rope
IS 1363 :1967Specification for black hexagon bolts, nuts andlock nuts (diameter 6 to 39 mm) and blackhexagon screws (diameter 6 to 24 mm)
IS 2585 :1968Specification for black square bolts and nuts(diameter range 6 to 39 mm) and black squarescrews (diameter range 6 to 24 mm)
IS 1566 :1966Specification for hard. drawn steel wire fabricfor concrete reinforcement
IS 1786 :1966Specification for cold twisted steel bars forconcrete reinforcement
IS 2116 :1965Specification for sand for masonry mortars
IS 3459 :1966Specification for small wire ropes