Revised Standard from Last Update.

1. Scope

This standard describes both geometrical and practical tests on vertical boring and turning mills having single or double columns with table diameter up to 1 600 mm, and the corresponding permissible deviations, with reference to IS 2063 (Part 1).

It deals with the verification of accuracy and applies neither to the testing of the running of the machine (vibrations, abnormal noises, stick slip motion of components, etc) nor to the machine characteristics (speeds, feeds, etc) which shall generally be checked before testing the accuracy.

2. References

The standards listed below contain provisions, which, through reference in this text, constitute provision of this standard. At the time of publication, the editions indicated were valid. All standards are subject torevision, and parties to agreements based on these standards are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

2063 (Part 1) : 2016 Test code for machine tools : Part 1 Geometric accuracy of machines operating under no-load or finishing conditions (third revision)

8000 (Part 1) : 1985 Geometrical tolerancing on technical drawings: Part 1 Tolerancing of form, orientation, location and run-out, and appropriate geometrical definitions (first revision)