IS 8085 : Part 22 : 2024/ISO 10750 : 2015 Methods of Test for Footwear - Part 22 Attachment Strength of End Stops

ICS 61.060

CHD 19

NATIONAL FOREWORD

This Indian Standard (Part 22) which is identical to ISO 10750 : 2015 'Footwear - Test method for slide fasteners - Attachment strength of end stops' issued by the International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on the recommendation of the Footwear Sectional Committee and approval of the Chemical Division Council.

This Indian Standard published as a part of IS 8085 under the general title 'Methods of test for footwear'. This part is an adoption of ISO 10750 : 2015 which describes a method intended to determine the attachment strength of the top and bottom stops of a slide fastener. The method is applicable to all types of slide fastener for footwear.

This Indian Standard is published in several parts. The other parts in this series are:

Part 1 Dimensions, fitting, adhesion test, peel test, heat resistance test and ageing test

Part 2 Footwear performance test, stiffness test for shanks, lastometer test for cracking of uppers; and performance test for upper fabrics, coated fabrics, sock lining and other lining materials

Part 3 Upper sole adhesion

Part 4 Resistance to crack initiation and growth - Belt flex method

Part 5 Longitudinal stiffness of shanks

Part 6 Abrasion resistance of uppers, linings and insocks

Part 7 Deformability of upper

Part 8 Delamination resistance of uppers

Part 9 Tear strength of uppers linings and insocks

Part 10 Heel attachment for whole shoe

Part 11 Attachment strength of straps, trims and accessories

Part 12 Tensile performance of elastic materials

Part 13 Seam strength for uppers, lining and insocks

Part 14 Water vapour permeability and absorption for uppers and lining

Part 15 Washability in a domestic washing machine for whole shoe

Part 16 Flexing durability for whole shoe

Part 17 Abrasion resistance for accessories shoe laces

Part 18 Peel strength before and after repeated closing for accessories touch

Part 19 Shear strength before and after repeated closing for accessories touch and close fasteners

Part 20 Flex Resistance for uppers and lining

Part 21 Strength of slide fastener pullers

Part 23 Resistance to repeated opening and closing

Part 24 Lateral Strength for slide fasteners

Part 25 Slip resistance

Part 26 Tensile strength and elongation for uppers

Part 27 Flex resistance of outsoles

Part 28 Top piece retention strength heels and top pieces

The text of ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain conventions and terminologies are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'; and

b) Comma (,) has been used as a decimal marker in the International Standard, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.