IS 8369 : 2010 : Titanium Carbide Powder For Hardmetals

Reaffirmed 2024

1. SCOPE

This standard specifies the requirements of titanium carbide powder used for the manufacture of hardmetals.

2. References

The following standards contain provisions, which through reference in this text, constitute provisions of this standard. At the time of the publication, the editions indicated were valid. All standards are subject to revision and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:

1387 : 1993 General requirements for the supply of metallurgical materials (second revision)

5432 : 1982 Glossary of terms relating to powder metallurgy (first revision)

6492 : 1972 Methods for sampling of powders for powder metallurgical purposes

7512 : 2006 Method for the determination of average particle size of metal powders by Fisher sub-sieve sizer (first revision)

12473 Chemical analysis of hardmetals by flame atomic absorption spectrometry:

(Part 1) : 1988 General requirements

(Part 2) : 1988 Determination of calcium, potassium, magnesium and sodium in contents from 0.001 to 0.02 percent (m/m)

(Part 3) : 1988 Determination of cobalt, iron manganese and nickel in contents from 0.01 to 0.5 percent (m/m)

(Part 4) : 1988 Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 percent (m/m)

(Part 5) : 1988 Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 percent (m/m)

(Part 6) : 1988 Determination of chromium in contents from 0.01 to 2 percent (m/m)

12539 : 1988 Determination of total carbon in hardmetals by gravimetric method

12548 : 1988 Determination of insoluble (free) carbon in hardmetals by gravimetric method