IS 8930 : Part 4 : 2006 /ISO 10209-4 : 1999 Technical Product Documentation - Vocabulary - Part 4 : Terms Relating to Construction Documentation

ICS 01.040.01;01.100.30;01.110 PGD 24
Reaffirmed 2022

National Foreword

This Indian Standard (Part 4) which is iderlIical with ISO 10209-4 : 1999 ?Technical productdocumentation - Vocabulary - Part 4: Terms relating to construction documentation? issued bythe International Organization for Standardization (ISO) was adopted by the Bureau of IndianStandards on the recommendation of the Drawings Sectional Committee and approval of the Productionand General Engineering Division Council.

This standard defines terms used in technical product documentation relating to building and civilengineering works.

It includes terms for documents which are frequently used during all phases of the building andmanagement process, from the initiation to the demolition of a construction project.

The other parts in this series are:

Part 1 Terms relating to technical drawings: General and types of drawings (first revision)

Part 2 Terms relating to projection methods

The text of ISO Standard has been approved as suitable for publication as an Indian Standard withoutdeviations. Certain conventions are, however, not identical to those used in Indian Standards. Attentionis particularly drawn to the following:

a) Wherever the words ?International Standard? appear referring to this standard, they shouldbe read as ?Indian Standard?.

b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practiceis to use a point (.) as the decimal marker.

In this adopted standard, reference appears to the following International Standard for which IndianStandard also exists. The corresponding Indian Standard which is to be substitutedin its place islisted below along with its degree of equivalence for the edition indicated:

International Standard Corresponding Indian Standard
ISO 10209-1 : 1992 IS 8930 : Part 1 : 1995 Technical product
documentation - Vocabulary: Part 1
Terms relating to technical drawings:
General and types of drawings
ISO 5127-1 : 1983 --