IS 9917 : 2022 Calcium Base Heat Stable Grease-Specification
Revised Standard from Last Update.
1 SCOPE
This standard prescribes the requirements and the method of sampling and tests for calcium base heat stable grease suitable for use in bearings operating in wet conditions.
2 REFERENCES
The following Indian Standards contain provisions which through reference in this text constitute the provisions of the standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below:
1447 (Part 3) : 2021 Methods of sampling of petroleum and its products: Part 3 Method of sampling of semi-solid and solid petroleum products (second revision)
1448 Methods of tests for petroleum and its products
(Part 4/Sec 2) : 2021 Ash from grease, sulphated ash and water soluble ash (fourth revision)
(Part 25/Sec 1) : 2018/ ISO 3014 : 1994 Transparent and opaque liquids, Section 1 Determination of kinematic viscosity and calculation of dynamic viscosity (second revision)
(Part 40) : 2015/ ISO 3733 : 1999 Petroleum products and bituminous materials — Determination of water — Distillation method (fourth revision)
(Part 51) : 1963 Copper strip corrosion test for lubricating greases
(Part 52) : 2017/ ISO 2176 : 1995 Drop point (second revision)
(Part 53) : 1979 Determination of acidity and alkalinity of greases (first revision)
(Part 59) : 1991 Determination of mineral oil content in greases (second revision)
(Part 60) : 1994 Consistency of lubricating greases by cone penetrometer (second revision)
(Part 62) : 1974 Heat stability of greases (first revision)
(Part 69) : 2019/ ISO 2592 : 2017 Determination of flash and fire points — Cleveland open cup method (second revision)
2062 : 2011 Hot rolled medium and high tensile structural steel — Specification (seventh revision)