New Standard from Last Update.

NATIONAL FOREWORD

This Indian Standard (Part 4/Sec 113) which is identical with IEC 61076-4-113 : 2002 ‘Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for twopart connectors having 5 rows with a grid of 2.54 mm for printed boards and backplanes in bus applications’ issued by the International Electro technical Commission (IEC) was adopted by the Bureauof Indian Standards on the recommendation of the Electromechanical Components and Mechanical Structures for Electronic Equipment’s Sectional Committee and approval of the Electronics and Information Technology Division Council.

This Indian Standard is published in different parts and sections:

1. Part 1 Generic specification

2. Part 4 Sectional specification - Printed board connectors

3. Part 4 / Sec 100 Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes

4. Part 4 / Sec 101 Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917

5. Part 4 / Sec 102 Printed board connectors, Section 102 Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917

6. Part 4 / Sec 103 Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2.5 mm

7. Part 4 / Sec 104 Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2.0 mm, with terminations on a multiple grid of 0.5 mm

8. Part 4 / Sec 105 Printed board connectors, Section 105 Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry

9. Part 4 / Sec 107 Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

10. Part 4 / Sec 108 Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1

11. Part 4 / Sec 110 Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2.0 mm including full shielding and latching function

12. Part 4 / Sec 115 Printed board connectors - Backplane connector for InfiniBand equipment

13. Part 4 / Sec 116 Printed board connectors - Detail specification for a high-speed twopart connector with integrated shielding function