IS/ISO 2041 : 2018 Mechanical Vibration, Shock and Condition Monitoring-Vocabulary

ICS 17.160; 01.040.17

MED 28

NATIONAL FOREWORD

This Indian Standard (First Revision) which is identical with ISO 2041 : 2018 'Mechanical Vibration, Shock and Condition Monitoring - Vocabulary' was adopted by the Bureau of Indian Standards on the recommendation of the Mechanical Vibration and Shock Condition Monitoring Sectional Committee and approval of the Mechanical Engineering Division Council.

This standard supersedes IS/IS0 2041 : 2009 'Mechanical vibration, shock and condition monitoring - Vocabulary' due to revision of its base standard.

The text of ISO Standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.

For the purpose of deciding whether a particular requirement of this standard is complied with the final value, observed or calculated, expressing the result of a test or analysis shall be rounded off in accordance with IS 2 : 1960 'Rules for rounding off numerical values ( revised )'. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.