IS/ISO 8528 : Part 5 : 2022 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 5 Generating Sets

ICS 27.020; 29.160.40

TED 02

NATIONAL FOREWORD

This Indian Standard (Part 5) (Second Revision) which is identical to ISO 8528-5 : 2022 'Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets' issued by International Organization for Standardization (ISO), was adopted by the Bureau of Indian Standards on the recommendations of Automotive Prime Movers, Transmissions Systems and Internal Combustion Engines Sectional Committee and approval of the Transport Engineering Division Council.

This standard was originally published in 2012 which was identical with ISO 8528-5 : 2005. The first revision of this standard was taken up to align it with ISO 8528-5 : 2018. This revision of the standard hs been brought out to align it with ISO 8528-5 : 2022.

The major changes in this revision are as follows:

a) Clause 3 has been revised;

b) A list of symbols has been added in 3.2;

c) Mistakes have been corrected in Table 4;

d) Previous Figures 3, 7, 8, 14 and 16 have been modified and renumbered;

e) Previous Figures 1 and 17 have been deleted; and

f) Annex A has been deleted.

This standard is one of the series of the standards published on 'Reciprocating internal combustion engine driven alternating current generating sets'. Other standards in this series are:

Part 1 Applications, ratings and performance

Part 2 Engines

Part 3 Alternating current generators for generating sets

Part 4 Control gear and switch gear

Part 6 Test methods

Part 7 Technical declaration for specification and design

Part 8 Requirements and tests for low-power generating sets

Part 9 Measurement and evaluation of mechanical vibrations

Part 10 Measurement of airborne noise by the enveloping surface method

Part 12 Emergency power supply to safety services

The text of the ISO standard has been approved as suitable for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words 'International Standard' appear referring to this standard, they should be read as 'Indian Standard'; and

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.