IS/ISO 8528 : Part 7 : 2017 Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets - Part 7 Technical Declarations for Specification and Design

ICS 27.020; 29.160.40 TED 02

Revised Standard from Last Update.

NATIONAL FOREWORD

This Indian Standard (Part 7) (First Revision) which is identical with ISO 8528-7 : 2017 ‘Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design’ issued by International Organization for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendations of the Automotive Prime Movers, Transmission Systems and Internal Combustion Engines Sectional Committee and approval of the Transport Engineering Division Council.

This Indian Standard was originally published in 2012 which was identical with ISO 8527-7 : 1994. The first revision of this standard has been undertaken to align it with ISO 8528-7 : 2017.

This Indian Standard is published in several parts. The other parts in this series are:

Part 1 Applications, ratings and performance

Part 2 Engines

Part 3 Alternating current generators for generating sets

Part 4 Control gear and switch gear

Part 5 Generating sets

Part 6 Test methods

Part 8 Requirements and tests for low-power generating sets

Part 9 Measurement and evaluation of mechanical vibration

Part 10 Measurement of airborne noise by the enveloping surface method

Part 12 Emergency power supply to safety services

The text of ISO Standard has been approved for publication as an Indian Standard without deviations. Certain terminologies and conventions are, however, not identical to those used in Indian Standards. Attention is particularly drawn to the following:

a) Wherever the words ‘International Standard’ appear referring to this standard, they should be read as ‘Indian Standard’.

b) Comma (,) has been used as a decimal marker, while in Indian Standards, the current practice is to use a point (.) as the decimal marker.